Nov 20, 2006
Carl Bass: We Don't Need PLM
During the quarterly conference call with financial analysts, Autodesk ceo Carl Bass stated that PLM is a bust: If I were to believe anybody's estimates, it should be about a ...
Nov 16, 2006
Autodesk Reports Record Revenues of $457 Million
SAN RAFAEL, Calif., Nov. 16 - Autodesk, Inc. (NASDAQ: ADSK) today reported record quarterly revenues of $457 million, an increase of 21 percent over the third quarter of fiscal 2006. ...
Nov 15, 2006
Economist Intelligence Unit and SAP make research of Russian SMB companies
Moscow, Russia, November, 15, 2006 - SAP (CIS) organized round table in context of representing results of the research, performed by Economist Intelligence Unit, which was devoted to the problems ...
Nov 13, 2006
UGS Reports Third Quarter Results; PLM Industry Leader Marks Solid Progress on Strategic Plan
PLANO, Texas – UGS Corp., a leading global provider of product lifecycle management (PLM) software and services, today announced third quarter 2006 results. Total revenue increased to US$295.5 million, 1.8 ...
Nov 08, 2006
Autodesk gives 132 free Inventor licences to Moscow Bauman Technical University
Moscow, Russia, November, 8, 2006 - in the framework of its 3D Education Programme, Autodesk has given 132 free Inventor licences to Moscow Bauman Technical University (in Russian).
Nov 01, 2006
PTC Reports Fourth Quarter and Fiscal Year 2006 Results
NEEDHAM, Mass., November 1, 2006 – PTC, today reported revenue of $245.5 million for the fourth quarter ended September 30, 2006, up 26% from the same period last year. For ...
Oct 31, 2006
Dassault Systemes soars with fast-growing Chinese Aviation Industry
Zhuhai, China – October 31, 2006 – Dassault Systemes (DS), today announced continued headway in China's aviation industry. Dassault Systemes has implemented over 3,000 CATIA V5 licenses with more than ...
Oct 26, 2006
Finmeccanica is permitted to acquire control packet of shares of Russia's major aircraft holding "Sukhoi"
Vladimir Putin, Russian President, today signed law, which extended opportunities of foreign companies to participate in Russian aircraft industry. Before the assignment share fraction of foreign companies in this industry ...
Oct 19, 2006
Dassault Systèmes Launches Out-of-the-Box, Scalable Multi-CAD Solution for SMBs
Kfar Saba, Israel, October 19, 2006 ─ Dassault Systemes (DS) today announced the launch of SmarTeam Design Express (SDE) for Multi-CAD, an out of the box solution that helps small ...
Oct 17, 2006
LEDAS representatives took part in the PLM Forum organized by Dassault Systemes in Moscow
On 12th October 2006, Moscow held the third PLM Forum Russia which focused on the software products and solutions offered by Dassault Systemes in the filed of product lifecycle management ...
Oct 12, 2006
SU-34 in the air!
Sukhoi Company (JSC), a Russia's major aircraft holding company, today announces that the first serial fighter-bomber Su-34 has taken off from the airdrome of the Novosibirsk Aircraft Production Association (NAPO). ...
Oct 10, 2006
CIMdata Releases its 2006 PLM Market Analysis Report: Comprehensive Information and Analysis of the PLM Market
Consulting and research firm CIMdata announces the availability of its annual Product Lifecycle Management (PLM) Market Analysis Report. The 2006 report provides the most complete analysis of the 2005 PLM ...
Oct 04, 2006
Dassault Systèmes launches CATIA PLM Express
Paris, France, October 4, 2006 — Dassault Systemes, a world leader in 3D and Product Lifecycle Management (PLM) solutions today announced CATIA PLM Express, a scalable solution which provides CATIA ...
Sep 29, 2006
Gartner presents Magic Quadrant for Product Life Cycle Management, 3Q06
PLM software vendors are responding to the broader enterprise-centric priorities that Gartner outlined in 2005. Consequently, there are three vendors that have entered the Leaders quadrant: DS, UGS and PTC.
Sep 29, 2006
Airbus to restructure after A380 crisis: shares of Russian and Chinese suppliers will be increased
The new chief executive of Airbus today outlined a vast restructuring plan for the ailing aircraft maker that could involve major job cuts and shifting more production out of Western ...
Sep 29, 2006
LEDAS appoints Vladimir Malukh as Director of PLM Sales and Services
LEDAS Ltd. (www.ledas.com), an independent software provider of computational components for PLM, today announced that Vladimir Malukh, Ph.D., has joined the company’s senior management team as Director of PLM Sales ...
Sep 28, 2006
Dassault Systemes integrates NVIDIA technology into CATIA
Paris, France, September 28, 2006 — Dassault Systemes (DS) (Nasdaq: DASTY; Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM) solutions today announced the integration ...
Sep 25, 2006
SolidWorks: 300,000 Still Use AutoCAD
25 of September SolidWorks published press-release with a curious statement: "These [new eDrawings Pro] capabilities will help more than 300,000 AutoCAD users who use SolidWorks software..." Discussion about this statement ...
Sep 21, 2006
CAD/CAM/CAE Observer #4(28)2006. Interview with F.Bernard and L.Valroff, DS
CAD/CAM/CAE Observer #4(28)2006: Interview with F.Bernard and L.Valroff, DS Russia Corp. [pdf, 310K]
Sep 19, 2006
Russian ERP Market is shared between four companies.
According to IDC report Russian market of ERP systems in 2005 increased 21%. More than 80% of market is belonged to SAP, Oracle, «1C» and Microsoft Dynamics.
Sep 15, 2006
Capvidia extends its software development services
Capvidia Outsourcing To meet the growing market demands for software outsourcing we at Capvidia have combined our best project management expertise with extended development resources into high-end outsourcing services operation. ...
Sep 08, 2006
UGS Announces New Releases for its D-Cubed 2D Component Software Solutions
CAMBRIDGE, England –UGS Corp., a leading global provider of product lifecycle management (PLM) software and services, and its D-Cubed subsidiary today announced the immediate availability of new releases of two ...
Sep 07, 2006
UGS' Solid Edge 2D Design Now Available at No Cost
PLANO, TX - UGS Corp., a leading global provider of product lifecycle management (PLM) software and services, today announced its Solid Edge(R) 2D Drafting software (a $995 value) will be ...
Sep 05, 2006
Dassault Systemes and IBM Announce Version 5 Release 17 of their Product Lifecyle Management (PLM) Portfolio
Paris, France, September 5, 2006 - Dassault Systemes (DS) (Nasdaq: DASTY; Euronext Paris: #13065, DSY.PA) and IBM today announced the release of Version 5 Release 17 (V5R17) of their Product ...
Aug 23, 2006
TAdviser presents list of Russian ERP vendors ordered by the number of introduced ERP projects
Consulting company TAdviser today announced availability of the list of Russian ERP vendors, published for the first time, which is ordered by the number of introduced projects (in Russian).
Aug 14, 2006
Infosoft Introduces 1C:8.0 on KAMEA Plant
Novosibirsk, Russia - August, 14, 2006 - Infosoft today announced completion of introduction of 1C:8.0 on KAMEA plant, software solution for accounting, finance planning, and enterprise management. KAMEA is a ...
Aug 08, 2006
CAD/CAM/CAE Observer issued an English translation of Yuris Berjoza article "Novosibirsk isicad has gained strength"
Nature can crash any stereotypes: for instance, the first summer days were marked with a heavy snowfall in Italy. Within just a few hours the foothills of the Apennines were ...
Aug 02, 2006
INFOR Accelerates Strategy, Increases Global Market Share with New Acquisitions
ATLANTA – August 2, 2006 – Infor, one of the largest global providers of enterprise software and a portfolio company of Golden Gate Capital, today announced it has accelerated its ...
Jul 18, 2006
CAPVIDIA and LEDAS announce plans to cooperate in the market of science-intensive technologies and software development
CAPVIDIA and LEDAS announce their plans to integrate and multiply their potentials in building, development and distribution of science-intensive technologies and software as well as in joint fulfillment of external ...
Jul 18, 2006
LEDAS participated in two international forums organized by Dassault Systemes in Paris: CAA V5 DEVCON-2006 and Education Partner Program Meeting
In the framework of the development of LEDAS Ltd. as a Competence Center in Siberian Region our specialists have participated in two international forums which recently took place in Paris, ...
Jul 04, 2006
Autodesk Launches the Latest Release of Industry-Leading Software, AutoCAD 2007, AutoCAD LT 2007
Autodesk Launches the Latest Release of Industry-Leading Software, AutoCAD 2007, AutoCAD LT 2007: http://www.cimdata.com/newsletter/2006/12/04/12.04.14.htm Russian version was kindly provided to isicad.ru by the Autodesk CIS office.
Jun 30, 2006
CAPVIDIA and LEDAS to cooperate in the market of science - intensive technologies and software development
CAPVIDIA, a Belgium-based product, service and technology provider in the area of CAD/CAM applications, CAE, simulation and multi-parameter optimization, and LEDAS Ltd. announce their plans to integrate and multiply their ...
Jun 22, 2006
CIMdata Commentary: isicad 2006, Akademgorodok Novosibirsk, Russia
isicad 2006, organized by Ledas Ltd. and supported by SibCongress and Sib3, was held 31 May–2 June in Akademgorodok, Novosibirsk, Russia and provided a forum for Siberia-based Russian companies to ...
Jun 21, 2006
LEDAS Ltd. becomes official sponsor of Sixth International Andrei Ershov Memorial Conference PERSPECTIVES OF SYSTEM INFORMATICS
Alexander Marchuk, the Chair of the Sixth International Andrei Ershov Memorial Conference "PERSPECTIVES OF SYSTEM INFORMATICSThe" today announced that LEDAS Ltd. is the new official sponsor of the conference. The ...
Jun 19, 2006
KOMPAS-3D Becomes The First Russian CAD Solution Compatible With eDrawings
ASCON Group, makers of the solid modeling solution - KOMPAS-3D V8 Plus, announced their compatibility with the eDrawings viewing and publishing application from Geometric Software Solutions Limited. This partnership allows ...
Jun 09, 2006
ASCON Group Announces the Release of KOMPAS-3D English
ASCON Group, a leading Russian vendor of CAD/CAM/PDM Solutions announced the immediate availability of the English release of its major solution for 3D mechanical design - KOMPAS-3D (Version 8 Plus). ...
Jun 08, 2006
LEDAS announces success of isicad-2006 «PLM+ERP: Informational Environment of Modern Enterprise»
LEDAS Ltd. (http://www.ledas.com), an independent software provider of computational components for PLM and ERP, announces successful conducting of the Second International Forum isicad-2006 (http://www.isicad.ru/2006) «PLM+ERP: Informational Environment of Modern Enterprise», ...
Jun 06, 2006
LEDAS becomes the first Education Partner of Dassault Systemes in Ural and Siberia
LEDAS and Dassault Systemes have signed a cooperation agreement in the area of education, which certifies that LEDAS has met all the requirements to become an Education Partner and is ...
May 24, 2006
Largest CAM Software Market Vendors Named by CIMdata
CIMdata, Inc. names the largest CAM Software vendors for 2005 in its recently released NC Software Market Assessment Report, Version 15. In this annual report, CIMdata also projects the leaders ...
May 23, 2006
LEDAS releases the second commercial version 1.1 of its variational geometric solver LGS 3D
The main advantage of the released version 1.1 is its progress in two key characteristics: overall performance and the proportion of successfully solved cases. LGS 3D 1.1 is almost twice ...
May 15, 2006
SSA Global to be Acquired by Infor: Combined Company Creates Third Largest Global Enterprise Software Provider
CHICAGO – May 15, 2006 – SSA Global™ (NASDAQ: SSAG), a leading global provider of extended enterprise solutions and services, today announced the signing of a definitive agreement under which ...
May 11, 2006
UGS Reports First Quarter Revenue of US$273.8 Million; Performance Marks 11th Consecutive Quarter of Revenue Growth for PLM Industry Leader
PLANO, Texas – UGS Corp., a leading global provider of product lifecycle management (PLM) software and services, today announced first quarter 2006 results. Total revenue increased to US$273.8 million, an ...
May 05, 2006
LEDAS announces the release of LGS 2D 1.5 with new functionality for engineering optimization
LEDAS Ltd., a leading provider of constraint-based technologies and software components for PLM, announces new engineering functionality with the release of LGS 2D 1.5, its geometric constraint solver for variational ...
May 02, 2006
SAP and Microsoft Introduce Duet™ Software, Bringing Together the Worlds of Productivity and Enterprise Applications
Twelve months after first unveiling plans to create "Project Mendocino" -- a joint product that enables people to interact quickly and easily with SAP business processes and data through Microsoft(R) ...
Apr 26, 2006
PTC To Acquire Leading Engineering Calculation Solution Provider Mathsoft
NEEDHAM, Mass. – April 26, 2006 – PTC (Nasdaq: PMTC), the Product Development Company(TM), today announced it has signed a definitive agreement to acquire Mathsoft Engineering & Education, Inc. (Mathsoft) ...
Apr 24, 2006
LEDAS releases a universal LGS 2D Integration Module
The LEDAS Company has developed and released a universal LGS 2D Integration Module. The Module is based on the competence of LEDAS in the development of constraint-based technologies and PLM ...
Apr 20, 2006
SAP Reports 22% Growth in Software Revenues for the 2006 First Quarter
WALLDORF - April 20, 2006 - SAP AG (NYSE: SAP) today announced its preliminary financial results for the first quarter ended March 31, 2006. Highlights of the results are as ...
Apr 11, 2006
Delcam's 15,000th customer is Russian helicopter plant
Delcam is pleased to announce that Russia's Rostvertol company, formally the Rostov Helicopter Plant, has become the 15,000th customer for its range of CADCAM software. The sale was also significant ...
Apr 06, 2006
ADEM Technologies releases its new integrated system, ADEM 8.0, with LEDAS geometric solver LGS 3D
The Russian integrated CAD/CAM/CAPP system ADEM 8.0 has been released by ADEM Technologies. One of the most important features of the integrated system ADEM is that the technical drawing and ...
Apr 05, 2006
CIMdata Reports PLM Market Growth Exceeds Forecasts
ANN ARBOR, Michigan, April 6, 2006 – According to recent statistics compiled by consulting and research firm CIMdata, Inc., the worldwide Product Lifecycle Management (PLM) market experienced an excellent year ...